[pvrusb2] IR Question?

[Ingo Flaschberger]

Hey,

and that also:
ps auxw | grep lirc

bye,

 	ingo flaschberger

geschaeftsleitung
crossip communications gmbH
------------------------------
sebastian kneipp gasse 1
a-1020 wien
fix: +43-1-726 15 22-217
fax: +43-1-726 15 22-111
mob: +43-699-105 86 719
www.xip.at
------------------------------
On Wed, 25 Jan 2006, Ingo Flaschberger wrote:

> Hi miephos,
>
>
> send the output from dmesg and lsmod.
>
> bye,
> 	ingo flaschberger
>
> geschaeftsleitung
> crossip communications gmbH
> ------------------------------
> sebastian kneipp gasse 1
> a-1020 wien
> fix: +43-1-726 15 22-217
> fax: +43-1-726 15 22-111
> mob: +43-699-105 86 719
> www.xip.at
> ------------------------------
> On Tue, 24 Jan 2006, Miephos wrote:
>
>> Hi Jeff,
>> thanks for your hint. I did what you say.
>> 
>> things that I did:
>> PC-MIEPHOS: # modprobe lirc_i2c
>> PC-MIEPHOS: # rclirc start
>> Starting lircd (/dev/lirc)                                           done
>> 
>> PC-MIEPHOS: # irrecord test.lirc
>> ......
>> Please send the finished config files to <lirc at bartelmus.de> so that I
>> can make them available to others. Don't forget to put all information
>> that you can get about the remote control in the header of the file.
>> 
>> Press RETURN to continue.
>> 
>> 
>> Hold down an arbitrary button.
>> ..................................................irrecord: gap not found,
>> can't continue
>> 
>> I see the dots then I press a button, but what is wrong "gap not found"
>> What must I do next??
>> 
>> Thanks for your help. I hope, I will get to get the IR to work with your 
>> help.
>> 
>> ~miephos
>> 
>> 
>> Am Sonntag, 22. Januar 2006 18:24 schrieb Jeff Sadowski:
>>> Ok it looks to me your all setup for lirc like I was
>>> saying earlier lircs docs are f***d so hers my first
>>> attempt :-P
>>> 
>>> mknod /dev/lirc c 61 0
>>> 
>>> then I keep a copy of the node in /etc/udev/devices/
>>> 
>>> mknod /etc/udev/devices/lirc c 61 0
>>> 
>>> so it is recreated on startup :-)
>>> 
>>> ok now for making sure your remote is working
>>> 
>>> irrecord test.lirc
>>> 
>>> then follow the instructions
>>> 
>>> if you see dots when you press the button you know its
>>> working ;-)
>>> 
>>> I'm still learning lirc but this will let you know its
>>> working.
>>> I'll be back with more later good luck.
>> _______________________________________________
>> pvrusb2 mailing list
>> pvrusb2 at isely.net
>> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
>