[pvrusb2] problem with a hvr-1900
Lorne Shantz
lorne_shantz at yahoo.com
Fri Sep 3 11:55:27 CDT 2010
Unfortunately, I can not help with your problem, but I can say I have a similar problem. I can not get my Hauppauge PVR USB device to work at all. However, I have a PCI wintv card, that works in MythTV, but I can not change channels! So I suspect it is more to do with MythTV than it is with the driver. ?? I've pretty much given up on getting my usb device working. ;(
--- On Fri, 9/3/10, Tomas Hylander <tomas.hylander at gmail.com> wrote:
> From: Tomas Hylander <tomas.hylander at gmail.com>
> Subject: [pvrusb2] problem with a hvr-1900
> To: pvrusb2 at isely.net
> Date: Friday, September 3, 2010, 12:37 AM
> Hi
> Have been trying to get my hvr-1900 to work but it looks
> like I cant get it
> to change channel.
>
> Various logs..
> ----------------------------------------------------------------------------
> tomas at MythCube:~$ lsusb
> Bus 004 Device 002: ID 046d:c505 Logitech, Inc. Cordless
> Mouse+Keyboard
> Receiver
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root
> hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root
> hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root
> hub
> Bus 001 Device 003: ID 2040:7300 Hauppauge
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root
> hub
> -----------------------------------------------------------------------------------
> tomas at MythCube:~$ lsmod | grep pvrusb2
> pvrusb2
> 130786 0
> dvb_core
> 86142 1 pvrusb2
> cx2341x
> 12469 1 pvrusb2
> v4l2_common
> 15431 4 tuner,cx25840,pvrusb2,cx2341x
> videodev
> 34361 4
> tuner,cx25840,pvrusb2,v4l2_common
> v4l1_compat
> 13251 2 pvrusb2,videodev
> tveeprom
> 11102 1 pvrusb2
> ------------------------------------------------------------------------------------
> [ 18.650838] Linux video capture
> interface: v2.00
> [ 18.844460] usbcore: registered new
> interface driver pvrusb2
> [ 18.844468] pvrusb2: V4L in-tree
> version:Hauppauge WinTV-PVR-USB2 MPEG2
> Encoder/Tuner
> [ 18.844475] pvrusb2: Debug mask is 31
> (0x1f)
> [ 18.845060] ACPI: PCI Interrupt Link
> [LPMU] enabled at IRQ 20
> [ 18.845073] nvidia 0000:00:03.5: PCI INT
> B -> Link[LPMU] -> GSI 20
> (level, low) -> IRQ 20
> [ 18.846044] ACPI: PCI Interrupt Link
> [SGRU] enabled at IRQ 23
> [ 18.846053] nvidia 0000:03:00.0: PCI INT
> A -> Link[SGRU] -> GSI 23
> (level, low) -> IRQ 23
> [ 18.846069] nvidia 0000:03:00.0: setting
> latency timer to 64
> [ 18.846080] vgaarb: device changed
> decodes:
> PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
> [ 18.846639] NVRM: loading NVIDIA UNIX x86
> Kernel Module 195.36.24 Thu
> Apr 22 09:18:20 PDT 2010
> [ 18.971206] Console: switching to colour
> frame buffer device 80x30
> [ 18.980361] CPU0 attaching sched-domain:
> [ 18.980370] domain 0: span 0,2
> level SIBLING
> [ 18.980377] groups: 0
> (cpu_power = 589) 2 (cpu_power = 589)
> [ 18.980390] domain 1:
> span 0,2 level MC
> [ 18.980395] groups: 0,2
> (cpu_power = 1178)
> [ 18.980405] domain 2: span
> 0-3 level CPU
> [ 18.980410]
> groups: 0,2 (cpu_power = 1178) 1,3
> (cpu_power = 1178)
> [ 18.980426] CPU1 attaching sched-domain:
> [ 18.980431] domain 0: span 1,3
> level SIBLING
> [ 18.980436] groups: 1
> (cpu_power = 589) 3 (cpu_power = 589)
> [ 18.980448] domain 1:
> span 1,3 level MC
> [ 18.980453] groups: 1,3
> (cpu_power = 1178)
> [ 18.980462] domain 2: span
> 0-3 level CPU
> [ 18.980467]
> groups: 1,3 (cpu_power = 1178) 0,2
> (cpu_power = 1178)
> [ 18.980481] CPU2 attaching sched-domain:
> [ 18.980486] domain 0: span 0,2
> level SIBLING
> [ 18.980491] groups: 2
> (cpu_power = 589) 0 (cpu_power = 589)
> [ 18.980503] domain 1:
> span 0,2 level MC
> [ 18.980508] groups: 0,2
> (cpu_power = 1178)
> [ 18.980517] domain 2: span
> 0-3 level CPU
> [ 18.980523]
> groups: 0,2 (cpu_power = 1178) 1,3
> (cpu_power = 1178)
> [ 18.980536] CPU3 attaching sched-domain:
> [ 18.980541] domain 0: span 1,3
> level SIBLING
> [ 18.980546] groups: 3
> (cpu_power = 589) 1 (cpu_power = 589)
> [ 18.980558] domain 1:
> span 1,3 level MC
> [ 18.980563] groups: 1,3
> (cpu_power = 1178)
> [ 18.980572] domain 2: span
> 0-3 level CPU
> [ 18.980577]
> groups: 1,3 (cpu_power = 1178) 0,2
> (cpu_power = 1178)
> [ 19.138694] HDA Intel 0000:00:08.0: power
> state changed by ACPI to D0
> [ 19.138836] HDA Intel 0000:00:08.0: power
> state changed by ACPI to D0
> [ 19.140242] ACPI: PCI Interrupt Link
> [LAZA] enabled at IRQ 22
> [ 19.140261] HDA Intel 0000:00:08.0: PCI
> INT A -> Link[LAZA] -> GSI 22
> (level, low) -> IRQ 22
> [ 19.140273] hda_intel: Disable MSI for
> Nvidia chipset
> [ 19.140355] HDA Intel 0000:00:08.0:
> setting latency timer to 64
> [ 19.848661] usb 1-2: firmware: requesting
> v4l-pvrusb2-73xxx-01.fw
> [ 19.882637] pvrusb2: Device
> microcontroller firmware (re)loaded; it
> should now reset and reconnect.
> [ 19.914445] usb 1-2: USB disconnect,
> address 2
> [ 19.914690] pvrusb2: Device being
> rendered inoperable
> [ 19.993060] hda_codec: ALC887: BIOS
> auto-probing.
> [ 20.241816] input: HDA Digital PCBeep as
> /devices/pci0000:00/0000:00:08.0/input/input5
> [ 20.932812] r8169: WARNING! Changing of
> MTU on this NIC may lead to frame
> reception errors!
> [ 21.672073] usb 1-2: new high speed USB
> device using ehci_hcd and address
> 3
> [ 21.818397] usb 1-2: configuration #1
> chosen from 1 choice
> [ 21.861633] cx25840 4-0044: cx25843-24
> found @ 0x88 (pvrusb2_a)
> [ 21.862505] pvrusb2: Attached sub-driver
> cx25840
> [ 21.894042] tuner 4-0042: chip found @
> 0x84 (pvrusb2_a)
> [ 21.912376] tda9887 4-0042: creating new
> instance
> [ 21.912387] tda9887 4-0042: tda988[5/6/7]
> found
> [ 21.913150] pvrusb2: Attached sub-driver
> tuner
> [ 21.926504] cx25840 4-0044: firmware:
> requesting v4l-cx25840.fw
> [ 24.454742] cx25840 4-0044: loaded
> v4l-cx25840.fw firmware (16382 bytes)
> [ 24.554004] tveeprom 4-00a2: Hauppauge
> model 73219, rev D2F5, serial#
> 7274879
> [ 24.554014] tveeprom 4-00a2: MAC address
> is 00-0D-FE-6F-01-7F
> [ 24.554021] tveeprom 4-00a2: tuner model
> is NXP 18271C2 (idx 155, type
> 54)
> [ 24.554029] tveeprom 4-00a2: TV standards
> PAL(B/G) PAL(I) SECAM(L/L')
> PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
> [ 24.554037] tveeprom 4-00a2: audio
> processor is CX25843 (idx 37)
> [ 24.554042] tveeprom 4-00a2: decoder
> processor is CX25843 (idx 30)
> [ 24.554048] tveeprom 4-00a2: has radio,
> has IR receiver, has IR
> transmitter
> [ 24.554066] pvrusb2: Supported video
> standard(s) reported available in
> hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
> [ 24.554080] pvrusb2: Mapping standards
> mask=0x3ff00ff
> (PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)
> [ 24.554088] pvrusb2: Setting up 20 unique
> standard(s)
> [ 24.554097] pvrusb2: Set up standard
> idx=0 name=PAL-B/G
> [ 24.554103] pvrusb2: Set up standard
> idx=1 name=PAL-D/K
> [ 24.554109] pvrusb2: Set up standard
> idx=2 name=SECAM-B/G
> [ 24.554115] pvrusb2: Set up standard
> idx=3 name=SECAM-D/K
> [ 24.554121] pvrusb2: Set up standard
> idx=4 name=PAL-B
> [ 24.554126] pvrusb2: Set up standard
> idx=5 name=PAL-B1
> [ 24.554132] pvrusb2: Set up standard
> idx=6 name=PAL-G
> [ 24.554138] pvrusb2: Set up standard
> idx=7 name=PAL-H
> [ 24.554143] pvrusb2: Set up standard
> idx=8 name=PAL-I
> [ 24.554149] pvrusb2: Set up standard
> idx=9 name=PAL-D
> [ 24.554155] pvrusb2: Set up standard
> idx=10 name=PAL-D1
> [ 24.554160] pvrusb2: Set up standard
> idx=11 name=PAL-K
> [ 24.554166] pvrusb2: Set up standard
> idx=12 name=SECAM-B
> [ 24.554172] pvrusb2: Set up standard
> idx=13 name=SECAM-D
> [ 24.554178] pvrusb2: Set up standard
> idx=14 name=SECAM-G
> [ 24.554184] pvrusb2: Set up standard
> idx=15 name=SECAM-H
> [ 24.554190] pvrusb2: Set up standard
> idx=16 name=SECAM-K
> [ 24.554195] pvrusb2: Set up standard
> idx=17 name=SECAM-K1
> [ 24.554201] pvrusb2: Set up standard
> idx=18 name=SECAM-L
> [ 24.554207] pvrusb2: Set up standard
> idx=19 name=SECAM-LC
> [ 24.554214] pvrusb2: Initial video
> standard auto-selected to PAL-B/G
> [ 24.554236] pvrusb2: Device
> initialization completed successfully.
> [ 24.554409] pvrusb2: registered device
> video0 [mpeg]
> [ 24.554418] DVB: registering new adapter
> (pvrusb2-dvb)
> [ 24.620865] cx25840 4-0044: firmware:
> requesting v4l-cx25840.fw
> [ 26.944036] eth0: no IPv6 routers
> present
> [ 27.124735] cx25840 4-0044: loaded
> v4l-cx25840.fw firmware (16382 bytes)
> [ 27.355490] usb 1-2: firmware: requesting
> v4l-cx2341x-enc.fw
> [ 27.656232] cx25840 4-0044: 0x0000 is not
> a valid video input!
> [ 27.706604] DVB: registering adapter 0
> frontend 0 (NXP TDA10048HN
> DVB-T)...
> [ 27.740746] tda18271 4-0060: creating new
> instance
> [ 27.741738] tda18271_read_regs: ERROR:
> i2c_transfer returned: -5
> [ 27.741751] Unknown device detected @
> 4-0060, device not supported.
> [ 27.741982] tda18271_read_regs: ERROR:
> i2c_transfer returned: -5
> [ 27.741993] Unknown device detected @
> 4-0060, device not supported.
> [ 27.742001] tda18271_attach: error -22 on
> line 1243
> [ 27.742011] tda18271 4-0060: destroying
> instance
> tomas at MythCube:~$
> -------------------------------------------------------------------------------
>
> My plan is to use it with MythTv, Ive set it up bot like a
> USB-device and
> like a ITVT-device without success.
> Entered my channels manually with MythWeb but only noise
> when changing
> channel.
>
> Tried using VLC, but cant figure out how to set frequency,
> "vlc /dev/video0"
> just brings same noise.
> The red lamp on the hvr-1900 lights up when Im trying to
> use it, so it looks
> like everything works except changing channel, so thats why
> Im thinking that
> the problem lies in pvrusb2-driver.
>
> All helps are appreciated since I've been trying for a
> couple of weeks now
> google around for info...
> Thanks!
> /Tomas
> _______________________________________________
> pvrusb2 mailing list
> pvrusb2 at isely.net
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
>
More information about the pvrusb2
mailing list