[pvrusb2] Compile issue

cardboil cardboil at gmail.com
Thu Dec 8 11:21:29 CST 2005 

Mike:

My bad, I hadn't plugged in the device.  After plugging it in and rebooting,
the device seems to be recognized.  Can you look at the output below and let
me know if it looks OK?  Appreciate your help.

pvrusb2 pvr_init
pvrusb2 pvr2_hdw_create: hdw=f712d000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=f712fcc0)
pvrusb2 pvr2_hdw_setup(hdw=f712d000) begin
pvrusb2 pvr2_upload_firmware1
usbcore: registered new driver pvrusb2
/home/mythtv/pvrusb2-mci-20051206/driver/pvrusb2-main.c: Hauppauge
WinTV-PVR-USB
2 MPEG2 Encoder/Tuner : 20051206 (from www.isely.net)
/home/mythtv/pvrusb2-mci-20051206/driver/pvrusb2-main.c: Debug mask is
4214975 (
0x4050bf)
pvrusb2 cpureset_assert(1)
pvrusb2 Upload done, releasing device's CPU
pvrusb2 cpureset_assert(0)
pvrusb2 Upload done (8192 bytes sent)
pvrusb2 pvr2_hdw_setup(hdw=f712d000) done, ok=1 init_ok=0
pvrusb2 Device firmware (re)load executed; it should now reset and
reconnect.
pvrusb2 pvr_disconnect(pvr=f712fcc0) BEGIN
pvrusb2 pvr2_hdw_disconnect(hdw=f712d000)
pvrusb2 pvr2_hdw_remove_usb_stuff: hdw=f712d000
pvrusb2 render_useless
pvrusb2 pvr2_hdw_destroy: hdw=f712d000
pvrusb2 pvr_disconnect(pvr=f712fcc0) DONE
pvrusb2 pvr2_hdw_create: hdw=f7fd7000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=f7398340)
pvrusb2 pvr2_hdw_setup(hdw=f7fd7000) begin
pvrusb2 Performing a device reset...
pvrusb2 i2c_attach [client=tveeprom @ 0x50 id=0xf2]
pvrusb2 attaching tveeprom I2C client
tuner (ivtv): chip found at addr 0xc2 i2c-bus pvrusb2_a
pvrusb2 i2c_attach [client=(tuner unset) @ 0x61 id=0x2]
pvrusb2 attaching tuner I2C client
pvrusb2 i2c_attach [client=MSP3415G-B8 @ 0x40 id=0x1]
pvrusb2 attaching msp3400 I2C client
saa7115 1-0021: saa7115 found @ 0x42 (pvrusb2_a)
pvrusb2 i2c_attach [client=saa7115 @ 0x21 id=0x49]
pvrusb2 i2c_attach [client=tda9887 @ 0x43 id=0xffffffff]
pvrusb2 attaching tda9887 I2C client
pvrusb2 pvr2_upload_firmware2
pvrusb2 Requesting uproc soft reset
pvrusb2 Requesting uproc hard reset
pvrusb2 upload of pvrusb2.f2 : 262144 / 262144
pvrusb2 Probing for ivtv video decoder driver
pvrusb2 pvr2_i2c_saa7115_cmd failed with status -22
pvrusb2 Failed to select a viable v4l video decoder driver
pvrusb2 eeprom detected v4l tveeprom module
pvrusb2 eeprom direct call results:
pvrusb2 has_radio=1
pvrusb2 tuner_type=38
pvrusb2 tuner_formats=0x400e17
pvrusb2 audio_processor=6
pvrusb2 model=29039
pvrusb2 revision=9508240
pvrusb2 serial_number=8039721
pvrusb2 rev_str=D160
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by pvrusb2_a
pvrusb2 Detected video standard SECAM-L (from eeprom)
pvrusb2 Detected video standard PAL-BG (from eeprom)
pvrusb2 Detected video standard PAL-I (from eeprom)
pvrusb2 Setting initial video standard to SECAM-L (detected from eeprom)
pvrusb2 /*--TRACE_COMMIT--*/ "Brightness" <-- 128 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Contrast" <-- 68 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Saturation" <-- 64 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Hue" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Volume" <-- 65535 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Balance" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Bass" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Treble" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Mute" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Sample rate" <-- 0 (48KHz)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Bitrate" <-- 3 (224kb/s)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio CRC" <-- 1 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Emphasis" <-- 0 (None)
pvrusb2 /*--TRACE_COMMIT--*/ "Variable video bitrate" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Average video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Peak video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Standard" <-- 1 (SECAM-L)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Source" <-- 0 (television)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Mode" <-- 1 (Stereo)
pvrusb2 /*--TRACE_COMMIT--*/ "Tuner Frequency (Hz)" <-- 175250000
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Horizontal capture resolution" <-- 720
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Vertical capture resolution" <-- 480
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Interlace mode" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Layer" <-- 2 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel Program ID" <-- 0 (<integer>)
pvrusb2 pvr2_stream_create: sp=f6c298c0
pvrusb2 pvr2_hdw_setup: video stream is f6c298c0
pvrusb2 pvr2_hdw_setup(hdw=f7fd7000) done, ok=1 init_ok=1
pvrusb2 Device initialization completed successfully.
pvrusb2 Registered pvrusb2 v4l device, minor=0
[root at 192 mythtv]# dmesg|grep -i pvrusb2
pvrusb2 pvr_init
pvrusb2 pvr2_hdw_create: hdw=f712d000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=f712fcc0)
pvrusb2 pvr2_hdw_setup(hdw=f712d000) begin
pvrusb2 pvr2_upload_firmware1
usbcore: registered new driver pvrusb2
/home/mythtv/pvrusb2-mci-20051206/driver/pvrusb2-main.c: Hauppauge
WinTV-PVR-USB2 MPEG2 Enc
oder/Tuner : 20051206 (from www.isely.net)
/home/mythtv/pvrusb2-mci-20051206/driver/pvrusb2-main.c: Debug mask is
4214975 (0x4050bf)
pvrusb2 cpureset_assert(1)
pvrusb2 Upload done, releasing device's CPU
pvrusb2 cpureset_assert(0)
pvrusb2 Upload done (8192 bytes sent)
pvrusb2 pvr2_hdw_setup(hdw=f712d000) done, ok=1 init_ok=0
pvrusb2 Device firmware (re)load executed; it should now reset and
reconnect.
pvrusb2 pvr_disconnect(pvr=f712fcc0) BEGIN
pvrusb2 pvr2_hdw_disconnect(hdw=f712d000)
pvrusb2 pvr2_hdw_remove_usb_stuff: hdw=f712d000
pvrusb2 render_useless
pvrusb2 pvr2_hdw_destroy: hdw=f712d000
pvrusb2 pvr_disconnect(pvr=f712fcc0) DONE
pvrusb2 pvr2_hdw_create: hdw=f7fd7000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=f7398340)
pvrusb2 pvr2_hdw_setup(hdw=f7fd7000) begin
pvrusb2 Performing a device reset...
pvrusb2 i2c_attach [client=tveeprom @ 0x50 id=0xf2]
pvrusb2 attaching tveeprom I2C client
tuner (ivtv): chip found at addr 0xc2 i2c-bus pvrusb2_a
pvrusb2 i2c_attach [client=(tuner unset) @ 0x61 id=0x2]
pvrusb2 attaching tuner I2C client
pvrusb2 i2c_attach [client=MSP3415G-B8 @ 0x40 id=0x1]
pvrusb2 attaching msp3400 I2C client
saa7115 1-0021: saa7115 found @ 0x42 (pvrusb2_a)
pvrusb2 i2c_attach [client=saa7115 @ 0x21 id=0x49]
pvrusb2 i2c_attach [client=tda9887 @ 0x43 id=0xffffffff]
pvrusb2 attaching tda9887 I2C client
pvrusb2 pvr2_upload_firmware2
pvrusb2 Requesting uproc soft reset
pvrusb2 Requesting uproc hard reset
pvrusb2 upload of pvrusb2.f2 : 262144 / 262144
pvrusb2 Probing for ivtv video decoder driver
pvrusb2 pvr2_i2c_saa7115_cmd failed with status -22
pvrusb2 Failed to select a viable v4l video decoder driver
pvrusb2 eeprom detected v4l tveeprom module
pvrusb2 eeprom direct call results:
pvrusb2 has_radio=1
pvrusb2 tuner_type=38
pvrusb2 tuner_formats=0x400e17
pvrusb2 audio_processor=6
pvrusb2 model=29039
pvrusb2 revision=9508240
pvrusb2 serial_number=8039721
pvrusb2 rev_str=D160
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by pvrusb2_a
pvrusb2 Detected video standard SECAM-L (from eeprom)
pvrusb2 Detected video standard PAL-BG (from eeprom)
pvrusb2 Detected video standard PAL-I (from eeprom)
pvrusb2 Setting initial video standard to SECAM-L (detected from eeprom)
pvrusb2 /*--TRACE_COMMIT--*/ "Brightness" <-- 128 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Contrast" <-- 68 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Saturation" <-- 64 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Hue" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Volume" <-- 65535 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Balance" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Bass" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Treble" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Mute" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Sample rate" <-- 0 (48KHz)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Bitrate" <-- 3 (224kb/s)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio CRC" <-- 1 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Emphasis" <-- 0 (None)
pvrusb2 /*--TRACE_COMMIT--*/ "Variable video bitrate" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Average video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Peak video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Standard" <-- 1 (SECAM-L)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Source" <-- 0 (television)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Mode" <-- 1 (Stereo)
pvrusb2 /*--TRACE_COMMIT--*/ "Tuner Frequency (Hz)" <-- 175250000
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Horizontal capture resolution" <-- 720
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Vertical capture resolution" <-- 480
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Interlace mode" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Layer" <-- 2 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel Program ID" <-- 0 (<integer>)
pvrusb2 pvr2_stream_create: sp=f6c298c0
pvrusb2 pvr2_hdw_setup: video stream is f6c298c0
pvrusb2 pvr2_hdw_setup(hdw=f7fd7000) done, ok=1 init_ok=1
pvrusb2 Device initialization completed successfully.
pvrusb2 Registered pvrusb2 v4l device, minor=0

More information about the pvrusb2 mailing list