[pvrusb2] Error loading pvrusb2.ko in FC4 box

[Matt Bachmann]

Hey! Well the good news is that there are know unknow symbols anymore!
thanks!

Now it seems I have a larger error issues

Jan  7 22:56:01 localhost kernel: usb 1-1: new high speed USB device using
ehci_hcd and address 5
Jan  7 22:56:02 localhost kernel: Linux video capture interface: v1.00
Jan  7 22:56:02 localhost kernel: pvrusb2 pvr_init
Jan  7 22:56:03 localhost kernel: pvrusb2 pvr2_hdw_create: hdw=f7d59000
Jan  7 22:56:03 localhost kernel: pvrusb2 Driver unit number is 0, name is
pvrusb2_a
Jan  7 22:56:03 localhost kernel: pvrusb2 subsys_stream_mask: 0x3c000
Jan  7 22:56:03 localhost kernel: pvrusb2 pvr_probe(pvr=f73fb180)
Jan  7 22:56:03 localhost kernel: usbcore: registered new driver pvrusb2
Jan  7 22:56:03 localhost kernel:
/home/Bachmann/Desktop/pvrusb2-mci-20060103/driver/pvrusb2-main.c: Hauppauge
WinTV-PVR-USB2 MPEG2 Encoder/Tuner : 20060103 (from www.isely.net)
Jan  7 22:56:03 localhost kernel:
/home/Bachmann/Desktop/pvrusb2-mci-20060103/driver/pvrusb2-main.c: Debug
mask is 8417471 (0x8070bf)
Jan  7 22:56:03 localhost kernel: pvrusb2 pvr2_hdw_setup(hdw=f7d59000) begin
Jan  7 22:56:03 localhost kernel: pvrusb2 Performing a device reset...
Jan  7 22:56:03 localhost kernel: usb 1-1: reset high speed USB device using
ehci_hcd and address 5
Jan  7 22:56:03 localhost kernel: pvrusb2 i2c_attach [client=tveeprom @ 0x50
ctxt=f5949940]
Jan  7 22:56:03 localhost kernel: tuner (ivtv): chip found at addr 0xc2
i2c-bus pvrusb2_a
Jan  7 22:56:03 localhost kernel: pvrusb2 i2c_attach [client=(tuner unset) @
0x61 ctxt=f60429e0]
Jan  7 22:56:03 localhost kernel: msp3400 0-0040: ivtv driver
Jan  7 22:56:03 localhost kernel: msp3400 0-0040: chip=MSP3445G-B8 +nicam
+simple +simpler +radio mode=simpler
Jan  7 22:56:03 localhost kernel: msp3400 0-0040: msp34xxg daemon started
Jan  7 22:56:03 localhost kernel: pvrusb2 i2c_attach [client=MSP3445G-B8 @
0x40 ctxt=c1b69720]
Jan  7 22:56:03 localhost kernel: saa7115 0-0021: saa7115 found @ 0x42
(pvrusb2_a)
Jan  7 22:56:03 localhost kernel: pvrusb2 i2c_attach [client=saa7115 @ 0x21
ctxt=f5949620]
Jan  7 22:56:03 localhost kernel: tda9887 0-0043: (ivtv) chip found @ 0x86
(pvrusb2_a)
Jan  7 22:56:03 localhost kernel: pvrusb2 i2c_attach [client=tda9887 @ 0x43
ctxt=f59495e0]
Jan  7 22:56:03 localhost kernel: pvrusb2 pvr2_upload_firmware2
Jan  7 22:56:03 localhost kernel: pvrusb2 Requesting uproc soft reset
Jan  7 22:56:03 localhost kernel: pvrusb2 Requesting uproc hard reset
Jan  7 22:56:04 localhost kernel: pvrusb2 request_firmware failed for '
pvrusb2.f2'
Jan  7 22:56:04 localhost kernel: pvrusb2 device unstable!!
Jan  7 22:56:04 localhost kernel: pvrusb2 render_useless
Jan  7 22:56:04 localhost kernel: pvrusb2 pvr2_hdw_setup(hdw=f7d59000) done,
ok=0 init_ok=0
Jan  7 22:56:04 localhost kernel: pvrusb2 ***WARNING*** pvrusb2 device
hardware appears to be jammed and I can't clear it.
Jan  7 22:56:04 localhost kernel: pvrusb2 You might need to power cycle the
pvrusb2 device in order to recover.

Whoa! Well looking at that it looks like I need to re-rip the firmware and
rebuild the driver?
does that sound right? Or this there something completely different I am
missing!

thanks

On 1/7/06, Ingo Flaschberger <if at xip.at> wrote:
>
> Hi
>
> >> Jan 7 02:03:16 localhost kernel: pvrusb2: Unknown symbol video_usercopy
> >> Jan 7 02:03:16 localhost kernel: pvrusb2: disagrees about version of
> symbol
> >> tveeprom_hauppauge_analog
>
> Trying to delete the tveeprom.ko, do a depmod -a and use now automagically
> the one from pvrusb2?
> Perhaps that helps.
>
> You should have following modules from kernel:
> tda9887.ko
> v4l2_common.ko
> v4l1_compat.ko
> videodev.ko
>
> And from pvrusb2:
> saa7115.ko
> msp3400.ko
> tuner.ko
> pvrusb2.ko
> tveeprom.ko
>
> bye,
>         Ingo
> _______________________________________________
> pvrusb2 mailing list
> pvrusb2 at isely.net
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
>