[pvrusb2] driver (auto) loading problem

[bartek szurgot]

this exacly what i've bought:

http://www.allegro.pl/item129482199_wintv_pvr_usb.html

that is 0x2040:0xa7f9 ... :/

i was sure this "usb2" is equivalent for "usb 2.0" standard, but i can see now 
that device should be rather called "pvr2 usb", am i right? :(

do you know about any driver for this device, or will i be forced to by new 
one?

regards
bart


On Monday 02 October 2006 19:21, Mike Isely wrote:
> 
> Are you sure you are dealing with a PVR USB2 device?  Does this device:
> 
>   http://www.hauppauge.com/pages/products/data_pvrusb2.html
> 
> resemble what you have?  Just checking the obvious cause(s) first, since 
> this is the sort of behavior I'd expect to see if the hardware doesn't 
> match the driver.  (And you wouldn't be the first to hit this sort of 
> thing.)
> 
> If you are sure you've got a matching device, then look at the USB ID 
> reported by the device.  It should be 2040:2900 or 2040:2400.
> 
>   -Mike
> 
> 
> On Mon, 2 Oct 2006, bartek szurgot wrote:
> 
> > hi,
> > 
> > i have problem with my wintv pvr usb on kernel 2.6.18 (driver 
in-kernel-tree).
> > i've put firmware (looks-like-successfuly ripped with your perl script) in 
a 
> > proper location, depmod -a has been made, thou after 
> > plugging device in nothing is beeing done, except for standard 
> > usb-some-device-found-raport:
> > 
> > ohci_hcd 0000:00:03.2: wakeup
> > usb 3-2: new full speed USB device using ohci_hcd and address 8
> > usb 3-2: configuration #1 chosen from 1 choice
> > 
> > when i do manual modprobe pvrusb2 i get only:
> > 
> > Linux video capture interface: v2.00
> > usbcore: registered new driver pvrusb2
> > drivers/media/video/pvrusb2/pvrusb2-main.c: Hauppauge WinTV-PVR-USB2 MPEG2 
> > Encoder/Tuner : V4L in-tree version
> > drivers/media/video/pvrusb2/pvrusb2-main.c: Debug mask is 15 (0xf)
> > 
> > so (ofcourse) cat /dev/video0 doesnt work.
> > 
> > i don't have idea what is wrong, since other usb devices work ok (mouse, 
> > pendrives...).
> > 
> > i use Debian Sarge 3.1r2, with own kernel.
> > _______________________________________________
> > pvrusb2 mailing list
> > pvrusb2 at isely.net
> > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> > 
> 
> -- 
>                         |         Mike Isely          |     PGP fingerprint
>      Spammers Die!!     |                             | 03 54 43 4D 75 E5 CC 
92
>                         |   isely @ pobox (dot) com   | 71 16 01 E2 B5 F5 C1 
E8
>                         |                             |
> _______________________________________________
> pvrusb2 mailing list
> pvrusb2 at isely.net
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> 
>