[pvrusb2] hvr-1900, mythtv and remote

[Aljaž Prusnik]

On ned, 2009-03-22 at 16:46 -0500, Mike Isely wrote:
> Make sure the lirc driver does not get loaded in the kernel.  Even if 
> you're not "using" lirc, the mere existence of the driver could be 
> enough to cause trouble.  And once it's gone, power cycle the HVR-1900 
> so that any screwed up state is cleared out.  Power cycling will also 
> cause the pvrusb2 driver to forget everything it previously knew about 
> the device and to reinitialize.
> If lirc is truly out of the picture here, then I currently do not have 
> any idea why you're getting I2C I/O errors.


Hi!

I tried it once more and had a more profound look at the log. It seems
that the DVB-T tuner device is different to that in the 1950 model
because I had to find one more firmware it was requesting:

DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
tda829x 2-0042: type set to tda8295
tda18271 2-0060: attaching existing instance
tda10048_firmware_upload: waiting for firmware upload
(dvb-fe-tda10048-1.0.fw)...
i2c-adapter i2c-2: firmware: requesting dvb-fe-tda10048-1.0.fw

It's not on your list of firmware files and I had hard time finding it
(seems to be identified as Technotrend 3650 CI for some reason). So my
suspicion for the error on the bus is that I'm not using the right
firmware for this. 

aljaz