[pvrusb2] HVR-1950 on the SheevaPlug (Ubuntu Jaunty)

[Kai Boenke]

> While I'm glad to hear that compiling as modules now works better for
> you, I'm a little puzzled as to why things didn't work when the driver
> was compiled into the kernel.  That should have worked.
>
> Can ANYONE else here reproduce this issue?  (Said another way: Can
> anyone verify correct pvrusb2 driver operation when the driver is
> compiled into the kernel?)

I have been trying to get my Hauppauge-USB DVB-T Tuner running for the
last couple of days. However, having everything compiled into my kernel
(2.6.31-06456-g78f28b7 running Debian Squeeze on a SheevaPlug) I just
stumbled upon the same error ("Unable to find symbol tda18271_attach()"):


cx25840 0-0044: cx25843-24 found @ 0x88 (pvrusb2_a)
pvrusb2: Attached sub-driver cx25840
tuner 0-0042: chip found @ 0x84 (pvrusb2_a)
pvrusb2: Attached sub-driver tuner
cx25840 0-0044: firmware: requesting v4l-cx25840.fw
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tveeprom 0-00a2: Hauppauge model 73219, rev D1E9, serial# 4959659
tveeprom 0-00a2: MAC address is 00-0D-FE-4B-AD-AB
tveeprom 0-00a2: tuner model is Philips 18271_8295 (idx 149, type 54)
tveeprom 0-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB D
igital (eeprom 0xf4)
tveeprom 0-00a2: audio processor is CX25843 (idx 37)
tveeprom 0-00a2: decoder processor is CX25843 (idx 30)
tveeprom 0-00a2: has radio, has IR receiver, has IR transmitter
pvrusb2: Supported video standard(s) reported available in hardware:
PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
pvrusb2: Mapping standards mask=0x3ff00ff
(PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)
pvrusb2: Setting up 20 unique standard(s)
pvrusb2: Set up standard idx=0 name=PAL-B/G
pvrusb2: Set up standard idx=1 name=PAL-D/K
pvrusb2: Set up standard idx=2 name=SECAM-B/G
pvrusb2: Set up standard idx=3 name=SECAM-D/K
pvrusb2: Set up standard idx=4 name=PAL-B
pvrusb2: Set up standard idx=5 name=PAL-B1
pvrusb2: Set up standard idx=6 name=PAL-G
pvrusb2: Set up standard idx=7 name=PAL-H
pvrusb2: Set up standard idx=8 name=PAL-I
pvrusb2: Set up standard idx=9 name=PAL-D
pvrusb2: Set up standard idx=10 name=PAL-D1
pvrusb2: Set up standard idx=11 name=PAL-K
pvrusb2: Set up standard idx=12 name=SECAM-B
pvrusb2: Set up standard idx=13 name=SECAM-D
pvrusb2: Set up standard idx=14 name=SECAM-G
pvrusb2: Set up standard idx=15 name=SECAM-H
pvrusb2: Set up standard idx=16 name=SECAM-K
pvrusb2: Set up standard idx=17 name=SECAM-K1
pvrusb2: Set up standard idx=18 name=SECAM-L
pvrusb2: Set up standard idx=19 name=SECAM-LC
pvrusb2: Initial video standard auto-selected to PAL-B/G
pvrusb2: Device initialization completed successfully.
pvrusb2: registered device video0 [mpeg]
cx25840 0-0044: firmware: requesting v4l-cx25840.fw
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tda829x 0-0042: setting tuner address to 60
DVB: Unable to find symbol tda18271_attach()
tda829x 0-0042: type set to tda8295+18271
usb 1-1: firmware: requesting v4l-cx2341x-enc.fw

As this was the only place mentioning this problem I am quite unsure
whether I am just missing something or if this is just a very isolated
problem. Nevertheless, any help will be appreciated. If I can provide
any further information to help pinpointing the problem I will be glad
to do so.

PS: Sorry if there is something odd with this Mail. This is actually my
first post to a Mailing-List... *blush*

-- 
Kai