[pvrusb2] HVR-1900 dvb-t problems

Leonardo Muffatti muffatti at stnetcomm.com
Wed Mar 31 16:53:26 CDT 2010


Hi, Armin

I asked for revision because w_scan doesn't work only for D1F5.

I need to try patches at
http://www.mail-archive.com/linux-media@vger.kernel.org/msg05570.html

So i can trash my own patches

Best regards,  

	Leonardo

-----Original Message-----
From: pvrusb2-bounces at isely.net [mailto:pvrusb2-bounces at isely.net] On Behalf
Of Gerritsen, Armin
Sent: Wednesday, 31 March, 2010 23:35
To: Communications nexus for pvrusb2 driver
Subject: Re: [pvrusb2] HVR-1900 dvb-t problems

Hi Leonardo,

It is D1F5.

In the mean time, I did find the issue. It was another set of fixes. So not
so much the one that were pointed out.

But since Pietro Popoli probably just replaced his while code drop he, also
got the other ones.

Off-line Mike Krufky, indentified the issue. I then found the required
patches.
The following 4 patches were required:

http://www.mail-archive.com/linux-media@vger.kernel.org/msg05570.html

Now I can tune dvbt as well.

However, I'm still curious as why you ask for the revision? You are
referring to the detection issue, where the EEPROM has a different ID?

Kind regards,

Armin


-----Original Message-----
From: pvrusb2-bounces at isely.net [mailto:pvrusb2-bounces at isely.net] On Behalf
Of Leonardo Muffatti
Sent: Wednesday, March 31, 2010 2:28 PM
To: 'Communications nexus for pvrusb2 driver'
Subject: Re: [pvrusb2] HVR-1900 dvb-t problems

Hi, Armin

What is your encoder model and revision?

HVR-1900 Hauppauge model 73219, rev D1E9 or HVR-1900 Hauppauge model 73219,
rev D1F5


Regards,  Leonardo


-----Original Message-----
From: pvrusb2-bounces at isely.net [mailto:pvrusb2-bounces at isely.net] On Behalf
Of Armin Gerritsen
Sent: Wednesday, 31 March, 2010 00:43
To: pvrusb2 at isely.net
Subject: Re: [pvrusb2] HVR-1900 dvb-t problems

Pietro Popoli <pietro.popoli at ...> writes:

>
> I did some tests on loading the firmware dvb-fe-tda10048-1.0.fw.
>
> I used the firmware downloaded from
> http://tw1965.myweb.hinet.net/Linux/firmware.tar.gz.
>
> The upload of the firmware is required, if not already loaded into the 
> HVR-1900, when an application DVB-T is launched.
>
> This is the output of dmesg:
> tda10048_firmware_upload: waiting for firmware upload 
> (dvb-fe-tda10048-1.0.fw)...
> usb 1-4.1: firmware: requesting dvb-fe-tda10048-1.0.fw
> tda10048_firmware_upload: firmware read 24878 bytes.
> tda10048_firmware_upload: firmware uploading
> tda10048_firmware_upload: firmware uploaded
>
> In my version of the HVR-1900 73219 LF REV D1F5 after loading the 
> firmware dvb-fe-tda10048-1.0.fw DVB-T still does not work.
>
> I followed the suggestions of Leonardo Muffatti (post
> http://www.isely.net/pipermail/pvrusb2/2010-February/002729.html) I 
> thank very much for sending me the necessary changes in sources of V4L.
>
> With the changes of Leonardo now dvb-t works.
>
> Leonardo also sent me his version of the firmware 
> dvb-fe-tda10048-1.0.fw different from those found on the web.
> I tried both firmware. It seems to me, but it could be a subjective 
> feeling, that with the firmware of Leonardo the video is more smooth.
> Thank to Aljaž, Leonardo and Mike for their cooperation.

Hello Pietro,

Could you elaborate a bit more on what 'the changes are'.

I seem to have the same issue as you have: analog works, with digital
doesn't.
It loads the firmware, but finds no frequencies using w_scan. Using tzap to
tune to a know frequency doesn't produce a lock.

The patches however that you refer too, in case they are missing, would
however have caused the tuner not to load the firmware at all, as it
wouldn't detect the device at all.

I know this, as I had an older dvb drop, and had to apply these patches to
make the tuner to be detected at all. And indeed as elsewhere noted, if you
have a more recent drop, these patches are already in. The fact that you're
system already detected it, also suggests you already had these patches.

So the question remains, what solved it for you?

But correct me if I'm wrong here.

Regards,

Armin


_______________________________________________
pvrusb2 mailing list
pvrusb2 at isely.net
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2


_______________________________________________
pvrusb2 mailing list
pvrusb2 at isely.net
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2

This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
_______________________________________________
pvrusb2 mailing list
pvrusb2 at isely.net
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2



More information about the pvrusb2 mailing list